Product Description

Customized single diaphragm coupling,coupling for encoder,high speed flexible servo motor shaft couplings

Product Name Single diaphragm coupling,coupling for encoder,high speed flexible servo motor shaft couplings
DN mm 12~160mm
Rated Torque 25~25000 N·m
Allowable speed 15300~1500 N·m
Material 35CrMo/ZG270/45# steel/Aluminum alloy
Application Widely used in metallurgy, mining, engineering and other fields.

Product show

Company Information

Equipment

 

Application Case

Typical case of diaphragm coupling applied to variable frequency speed control equipment

JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant

According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.

It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.

Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.

 

Other Application Case

 

Spare parts

 

Packaging & Shipping

 

Contact us

 

shaft coupling

Materials Used in Manufacturing Encoder Couplings

Encoder couplings are manufactured using a variety of materials, each chosen for its specific properties and suitability for the intended application. Commonly used materials include:

1. Aluminum: Aluminum is lightweight, corrosion-resistant, and offers good machinability. It is often used for encoder couplings in applications where weight reduction and moderate torque transmission are important.

2. Stainless Steel: Stainless steel is known for its excellent corrosion resistance and durability. It is commonly used in environments where exposure to moisture, chemicals, or harsh conditions is a concern.

3. Steel: Steel is robust and offers high strength, making it suitable for heavy-duty applications with higher torque requirements. It can be further treated for enhanced corrosion resistance.

4. Brass: Brass provides good corrosion resistance and electrical conductivity. It is often used in applications where electrical isolation between components is necessary.

5. Plastics: Various engineering plastics such as nylon, polyurethane, and PEEK (polyether ether ketone) are used in encoder couplings. These materials offer good wear resistance, low friction, and electrical insulation.

6. Carbon Fiber: Carbon fiber is a lightweight, high-strength material known for its exceptional stiffness-to-weight ratio. It is used in applications where minimizing weight while maintaining rigidity is crucial.

7. Composite Materials: Composite materials combine different materials to achieve specific properties. They can offer a combination of strength, rigidity, and lightweight characteristics.

The choice of material depends on factors such as the application’s requirements, environmental conditions, torque and speed specifications, and the need for electrical insulation or conductivity. When selecting the material for an encoder coupling, it’s essential to consider the mechanical, thermal, and chemical properties required for optimal performance and longevity.

shaft coupling

Impact of Encoder Resolution on Choice of Coupling

The encoder resolution plays a crucial role in selecting an appropriate coupling for your system. Encoder resolution refers to the number of distinct positions a rotary encoder can detect in one full rotation. Here’s how encoder resolution impacts the choice of coupling:

1. Precision Requirements:

Higher encoder resolutions provide finer position accuracy. If your application demands high precision and accuracy, such as in robotics or CNC machines, a coupling that minimizes backlash and offers precise torque transmission is essential.

2. Backlash Sensitivity:

As encoder resolution increases, the system becomes more sensitive to backlash (play between coupling components). To mitigate this, a coupling with minimal backlash, such as a zero-backlash or low-backlash coupling, is recommended to ensure accurate position feedback.

3. Dynamic Response:

Higher encoder resolutions allow systems to detect even small movements, improving dynamic response. For applications requiring rapid and accurate positioning changes, a coupling that provides high torsional stiffness and low wind-up is beneficial.

4. Mechanical Compliance:

Low-resolution encoders may tolerate some misalignment due to their coarser feedback intervals. However, high-resolution encoders are more sensitive to misalignment, making it important to choose a coupling that accommodates misalignment while maintaining signal accuracy.

5. Coupling Selection:

For high-resolution encoders, consider couplings that provide precision, low backlash, and accurate torque transmission, such as beam couplings, bellows couplings, or Oldham couplings. These couplings help maintain the integrity of position feedback and optimize system performance.

6. Environmental Factors:

The operating environment can affect the choice of coupling. For applications with extreme conditions, such as temperature fluctuations or aggressive chemicals, select a coupling material that can withstand these conditions without compromising the encoder’s accuracy.

Ultimately, the encoder resolution influences the coupling choice by demanding a coupling that complements the precision, accuracy, and dynamic performance required by the application.

shaft coupling

Importance of Backlash Reduction in Encoder Couplings

Backlash reduction is a critical consideration when selecting encoder couplings, particularly in motion control and automation applications that require precision and accuracy. Backlash refers to the angular or linear movement that occurs when the direction of motion changes in a mechanical system.

In encoder couplings, backlash can lead to inaccuracies in signal transmission between the encoder and the driven component. This is especially problematic in applications that involve rapid changes in direction or require precise positioning. The importance of backlash reduction can be understood through the following points:

1. Precision: Backlash can introduce errors in the measurement or position control process. As the system changes direction, the backlash can cause a delay in the response of the encoder, leading to inaccurate position readings or control commands.

2. Repeatability: Systems that require consistent and repeatable motion rely on accurate signal transmission. Backlash can lead to inconsistencies in positioning, making it difficult to achieve the desired level of repeatability.

3. Minimized Error Accumulation: In applications that involve multiple movements and direction changes, backlash can accumulate and lead to a cumulative error over time. This can result in a significant deviation from the intended position or motion path.

4. Smooth Operation: Backlash can cause jerky or uneven motion transitions, affecting the overall smoothness of operation. In applications where smooth and continuous motion is crucial, backlash reduction becomes essential.

5. Feedback Loop Integrity: Many encoder systems rely on closed-loop feedback control to maintain accuracy. Backlash can disrupt the feedback loop, causing the system to overcompensate for the movement delay and leading to instability.

6. System Efficiency: Backlash can result in energy loss and mechanical stress as the system compensates for the delay in movement. This can reduce the overall efficiency of the system.

To address these challenges, encoder couplings are designed with features that minimize backlash. Coupling designs may incorporate mechanisms such as preloading, spring elements, or specialized materials that reduce the clearance between components, effectively reducing or eliminating backlash. By selecting encoder couplings with reduced backlash, motion control and automation systems can achieve higher levels of accuracy, repeatability, and overall performance.

China supplier Customized Single Diaphragm Coupling, Coupling for Encoder  China supplier Customized Single Diaphragm Coupling, Coupling for Encoder
editor by CX 2023-08-31